User`s manual

- 26 -
Jumper
JP1 : Clear CMOS setting
Back Panel Connectors
COM1 : COM1 Port (DB9 male)
VGA : VGA Port (DB15 female)
1394a : IEEE 1394a Port
USB1 : USB 0/1 Ports
LAN : 10/100 base-T LAN Port
USB2 : USB 2/3 Ports
MS : PS/2 Mouse Port
KB : PS/2 Keyboard Port
Bass/Center : Bass/Center-Out Port
Rear-Out : Rear-Out Port
Front-Out : Front-Out Port
Front Panel Connectors
PWON : ATX power on/off momentary type switch
HLED : IDE drive active LED
GLED/PLED : Green LED (ON when system stays in power saving
mode)/System power LED
RST : Hardware reset switch
JP16 : Front Panel Header
Internal Peripherals Connectors
FDD1 : Floppy disk drive interface
IDE1 : IDE primary interface (Dual-channel)
IDE2 : IDE secondary interface (Dual-channel)
SATA : Serial ATA Connectors
Other Connectors
ATX1/ATX2 : ATX/ATX+12V power Connectors
FAN1/2/3 : CPU/System/Chipset fan Connectors
JP11 : Audio CD_IN Connector
JP6 : Wireless Keyboard and Mouse Connector
C1
C2
C3
C4
D1
D1
D1
C5
E1
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
A1
B11
D2
E2
E3
E4