Specifications

BIOSP2-133A

Page 4-15

4-7 Integrated Peripherals

Figure 8: Integrated Peripherals

Note: If you do not use the Onboard IDE connector, then you will need to

set Onboard Primary PCI IDE: Disabled and Onboard Secondary PCI

IDE: Disabled

Note: The Onboard PCI IDE cable should be equal to or less than 18

inches (45 cm.).

IDE HDD Block Mode: IDE Block Mode allows the controller to access blocks

of sectors rather than a single sector at a time.

The default is Enabled.

Enabled: Enabled IDE HDD Block Mode. Provides higher HDD

transfer rates.

Disabled: Disable IDE HDD Block Mode.

Onchip IDE First Channel: The default value is Enabled.

Enabled: Enables Onboard IDE primary port.

Disabled: Disables Onboard IDE primary port.

ROM PCI/ISA BIOS(2A6LFPAB)

INTEGRATED PERIPHERALS

AWARD SOFTWARE, INC.

OnChip IDE Channel0 : Enabled Onboard Parallel Port : 378/IRQ7

OnChip IDE Channel1 : Enabled Onboard Parallel Mode : ECP / EPP

IDE Prefetch Mode : Enabled ECP Mode Use DMA : 3

IDE HDD Block Mode : Enabled Parallel Port EPP Type : EPP1.9

Primary Master PIO : Auto OnChip USB : Enabled

Primary Slave PIO : Auto USB Keyboard Support : Disabled

Secondary Master PIO : Auto

Secondary Slave PIO : Auto POWER ON Method : Hot Key

Primary Master UDMA : Auto KB Power ON Password : Enter

Primary Slave UDMA : Auto Hot Key Power ON : Ctrl-F1

Secondary Master UDMA : Auto

Secondary Slave UDMA : Auto

Init Display First : PCI Slot

Onboard FDD Controller : Enabled

Onboard Serial Port 1 : 3F8/IRQ4

Onboard Serial Port 2 : 2F8/IRQ3

UART 2 Mode : Standard

Esc : Quit : Select Item

F1 : Help PU/PD/+/- : Modify

F5 : Old Values (Shift) F2 : Color

F7 : Load Setup Defaults

éé

êê

èè

çç