Specifications

FeaturesP2-112A
Page 2-1
Section 2
FEATURES
P2-112A Features:
• P2-112A is based on the Pentium
®
II or Deschutes Processor operating
at 233 ~ 333MHz (66MHz) or 300 ~ 550MHz (100MHz) on Slot 1. The board
is configured by ESDJ to match your CPU clock speed.
• Designed with VIA APOLLO PRO AGPset.
• Supports up to 384 Mega of DRAM (minimum of 16 MB) on board, You can
use 168-pin DIMM x 3. It will automatically detect Extended Data Output
(EDO) DRAM at 66MHz only or Synchronous DRAM memory (SDRAM) at
66MHz or 100MHz (please see Section 3-2).
• P2-112A will support Error Checking and Correcting (ECC) when using
paritys DRAM memory modules. This will detect multiple bit errors and
correct 1-bit memory errors.
• Supports (2) 16 bit ISA slots, (5) 32 bit PCI slots, (1) AGP slot and provides
(2) independent high performance PCI IDE interfaces capable of supporting
PIO Mode 3/4 and Ultra DMA 33 devices. The P2-112A supports (2)
PCI Bus Master slots and a jumperless PCI INT# control scheme which
reduces configuration confusion when plugging in PCI card(s).
• Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary IDE
interfaces.
• Designed with Winbond W83877TF Multi I/O: (1) floppy port, (1) parallel port
(EPP, ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese “Floppy 3 mode” is also supported
• Includes a PS/2 mouse connector.
• Allows use of a PS/2 keyboard.
• Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released. (http://www.epox.com
please visit our Technical Support section for the latest updates)