Specifications

FeaturesEP-MVP4F
Page 2-1
Section 2
FEATURES
EP-MVP4F Features:
• Intel Pentium
®
Processor, Pentium Processor with MMX technology,
AMD K6/K6-2/K6 III, Cyrix 6x86MX/MII, IDT C6/Winchip, and Rise mp6
series operating at 133 ~ 500MHz with 321 ZIF socket 7 provides
scalability to accept faster Processors in the future.
• Designed with VIA MVP4 AGPset.
• Supports up to 256 MB of DRAM (minimum of 8 MB) on board,
You can use 168-pin DIMM x 2. (please see Section 3-2).
• Supports (2) 32 bit PCI slots, (1) AMR Slot and provides (2) independent
high performance PCI IDE interfaces capable of supporting PIO Mode 3/4
and Ultra DMA 33/66 devices. The EP-MVP4F supports (2) PCI Bus Master
slots and a jumperless PCI INT# control scheme which reduces configura-
tion confusion when plugging in PCI card(s).
• Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary
IDE interfaces.
• Designed with lntegrated Multi I/O: (1) floppy port, (1) parallel port
(EPP, ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese “Floppy 3 mode” is also supported
• Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released. (http://www.epox.com
please visit our Technical Support section for the latest updates)
• EP-MVP4F utilizes a Lithium battery which provides environmental
protection and longer battery life.
• Software power-down when using Windows
®
95/98.