Specifications

BIOS KP6-LA
Page 4-16
Resume by Ring: This option is used to set the remote ring in feature.
The default is Enabled.
Enabled: The system can use remote ring-in to wake the system up.
Disabled: The system cannot use remote ring in to wake system up.
IRQ 8 Break Suspend: Select this to enable a device on IRQ 8 to break the power
save suspend feature.
The default is Disabled.
Enabled: A device at IRQ 8 can break the suspend feature
Disabled: A device at IRQ 8 cannot break the suspend feature
**Reload Global Timer Events **
These options allow the user to reset the global power features timer if any of the
enabled events occur.
IRQ [3-7, 9-15], NMI: The default is Enable.
Primary IDE 0: The default is Disable.
Primary IDE 1: The default is Disable.
Secondary IDE 0: The default is Disable.
Secondary IDE 1: The default is Disable.
Floppy Disk: The default is Disable.
Serial Port: The default is Enable.
Parallel Port: The default is Disable.
4-5 PNP/PCI Configuration
The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ
signals when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING: Conflicting IRQ’s may cause the system to not find certain devices.