Specifications

BIOS EP-BX3

Page 4-18

The default is Enabled.

Enalbed: Provides IRQ for USB device.

Disabled: Release IRQ for other device.

4-6 Load Setup Defaults

The “LOAD SETUP DEFAULTS” function loads the system default data directly

from ROM and initializes the associated hardware properly. This function will be

necessary only when the system CMOS data is corrupted.

4-7 Integrated Peripherals

Figure 8: Integrated Peripherals

Note: If you do not use the Onboard IDE connector, then you will need to

set Onboard Primary PCI IDE: Disabled and Onboard Secondary PCI

IDE: Disabled

Note: The Onboard PCI IDE cable should be equal to or less than 18

inches (45 cm.).

ROM PCI/ISA BIOS(2A69KPAB)

INTEGRATED PERIPHERALS

AWARD SOFTWARE, INC.

IDE HDD Block Mode : Enabled Onboard Parallel Port : 378/IRQ7

IDE Primary Master PIO : Auto Onboard Parallel Mode : ECP / EPP

IDE Primary Slave PIO : Auto ECP Mode Ise DMA : 3

IDE Secondary Master PIO : Auto Parallel Port EPP Type : EPP1.9

IDE Secondary Slave PIO : Auto

IDE Primary Master UDMA : Auto POWER ON Method : Hot Key

IDE Primary Slave UDMA : Auto KB Power ON Password : Enter

IDE Secondary Master UDMA : Auto Hot Key Power ON : Ctrl-F1

IDE Secondary Slave UDMA : Auto

Onboard Primary PCI IDE : Enabled

Onboard Secondary PCI IDE : Enabled

USB Keyboard Support : Disabled

KBC Input Clock : 12MHz

Onboard FDD Controller : Enabled

Onboard Serial Port 1 : Auto

Onboard Serial Port 2 : Auto

Onboard IR Controller : Disabled

Esc : Quit : Select Item

F1 : Help PU/PD/+/- : Modify

F5 : Old Values (Shift) F2 : Color

F7 : Load Setup Defaults

éé

êê

èè

çç