Specifications

BIOS EP-BX3
Page 4-12
CPU Warning Temperature: This is the temperature that the computer will
respond to an overheating CPU.
The default is Disabled.
Enabled: Temperature is monitored on the CPU
Disabled: This feature is turned off.
Current CPU Temperature: This is the current temperature of the CPU.
Current Power FAN Speed: The current power fan speed in RPMs.
Current CPU FAN Speed: The current CPU fan speed in RPMs.
Current Chassis FAN Speed: The current chassis fan speed in RPMs.
CPU(V): The voltage level of the CPU.
+1.5V: The voltage level of the CPU’s GTL+ Bus.
+3.3V,
+5V, +12V: The voltage level of the switch power supply.
4-4 Power Management Setup
Choose the “POWER MANAGEMENT SETUP” in the CMOS SETUP UTILITY
to display the following screen. This menu allows the user to modify the power
management parameters and IRQ signals. In general, these parameters should not be
changed unless it’s absolutely necessary.
Figure 5: Power Management Setup
ROM PCI/ISA BIOS (2A69KPAB)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : User Define ** Reload Global Timer Events **
PM Control by APM : Yes IRQ [3-7, 9-15], NMI : Enabled
Video off Method : V/H SYNC+Blank Primary IDE 0 : Disabled
Video off After : Standby Primary IDE 1 : Disabled
Modem Use IRQ : 3 Secondary IDE 0 : Disabled
Doze Mode : Disabled Secondary IDE 1 : Disabled
Standby Mode : Disabled Floppy Disk : Disabled
Suspend Mode : Disabled Serial Port : Disabled
HDD Power Down : Disabled Parallel Port : Disabled
Throttle Duty Cycle : 62.5%
VGA Active Monitor : Enabled
Soft-off by PWB-BTTN : Delay 4 Sec.
Resume by Alarm : Enabled
Power Loss Recovery : Enabled
Resume By Alarm : Enabled
Date (of Month) Alarm : 0
Time (hh:mm:ss) Alarm : 8: 0 :0
IRQ 8 Clock Event : Disabled
Esc : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F7 : Load Setup Defaults
éé
éé
é
êê
êê
ê
èè
èè
è
çç
çç
ç