Specifications

BIOSEP-BX3
Page 4-11
Delayed Transaction: This option allows the chipset to use its embedded 32-bit
posted write buffer to support delay transactions cycles.
The default is Disabled.
Enabled: Select enabled to support PCI 2.1 specification.
Disabled: Disabled.
AGP Aperture Size: The amount of system memory that the AGP card is allowed
to share.
The default is 64.
4: 4MB of systems memory accessable by the AGP card.
8: 8MB of systems memory accessable by the AGP card.
16: 16MB of systems memory accessable by the AGP card.
32: 32MB of systems memory accessable by the AGP card.
64: 64MB of systems memory accessable by the AGP card.
128: 128MB of systems memory accessable by the AGP card.
256: 256MB of systems memory accessable by the AGP card.
Auto Detect DIMM/PCI Clk: Allows you to stop DIMM/PCI Clock drive when
the DIMM site or PCI Slot are not plug. This item may help reduce EMI.
The default is Enabled.
Enabled: Provides unused DIMM/PCI to stop.
Disabled: Provides the clock generator always driving.
Spread Spectrum Modulated: Allows you to active the Spread Spectrum Modula-
tion function for reduce EMI. (Note: When Enabled the item that performance will
be impacted).
The default is Enabled.
Enabled: Provides the Spread Spectrum function from clock generator.
Disabled: NO Spread Spectrum function.
CPU Host Clock: This item can show on the screen when the JP3 setting at
66MHz. Allows you to option others frequency at 66, 75 or 83MHz for CPU Host
Clock.
The default is Default that is means 66MHz.