Specifications

BIOS EP-BX3

Page 4-8

4-3 Chipset Features Setup

Choose the “CHIPSET FEATURES SETUP” in the CMOS SETUP UTILITY

menu to display following menu.

Figure 4: Chipset Features Setup

Auto Configuration: This selects predetermined optimal values of the chipset

parameters.

The default is Enabled.

Enabled: This enables auto-configuration and provides the option to select

predefined timing modes.

Disabled: This allows the user to specify DRAM timing parameters.

Note: If you exceed the performance characteristics of memory in your

system it will result in lockups, crashes and other problematic system

operations.

EDO DRAM Speed Selection: This value must correspond to the speed of the

DRAM installed in your system.

The default is 60ns. This item is for EDO DIMM in Pentium

II processor at 66MHz

only.

ROM PCI/ISA BIOS(2A69KPAB)

CHIPSET FEATURES SETUP

AWARD SOFTWARE, INC.

Auto Configuration : Enabled Auto Detect DIMM/PCI Clk : Enabled

EDO DRAM Timing : 60ns Spread Spectrum Modulated : Enabled

CPU Host Clock : Default

EDO CASx# MA wait state : 2 CPU Warning Temperature : 60C/140F

EDO RAS Wait State : 2 Current cpu Temperature : 31C/87F

SDRAM CAS LATENCY Time : 3 Current System Temp : 31C/87F

DRAM Data Integrity Mode : Non-ECC Current PWR SUP FAN Speed : 0 RPM

System BIOS Cacheable : Enabled Current CPU FAN Speed : 5578 RPM

Video BIOS Cacheable : Enabled Current Chiassis FAN Speed : 0 RPM

Video RAM Cacheable : Enabled CPU(V) : 2.80 V +1.5V : 1.48 V

8 Bit I/O Recovery Time : 1 +3.3V : 3.36 V +5V : 5.16 V

16 Bit I/O Recovery Time : 1 +12V : 12.28 V -12V : 11.90 V

Memory Hole At 15M-16M : Disabled -5V : 5.20 V

Passive Release : Enabled

Delayed Transaction : Disabled

AGP Aperture Size (MB) : 64

Esc : Quit : Select Item

F1 : Help PU/PD/+/- : Modify

F5 : Old Values (Shift) F2 : Color

F7 : Load Setup Defaults

éé

êê

èè

çç