Specifications

BIOSEP-MVP3C/2
Page 4-9
4-4 Power Management Setup
Choose the “POWER MANAGEMENT SETUP” in the CMOS SETUP UTILITY to
display the following screen. This menu allows the user to modify the power manage-
ment parameters and IRQ signals. In general, these parameters should not be changed
unless it’s absolutely necessary.
Figure 5: Power Management Setup
You can only change the content of Doze Mode, Standby Mode, and Suspend Mode
when the Power Management is set to ‘User Define’.
Power Management: Use this to select your Power Management selection.
The default is User define.
Disabled: The system operates in NORMAL conditions (Non-GREEN), and
the Power Management function is disabled.
Max. saving: Maximum power savings. Inactivity period is 1 minute in each
mode.
Min. saving: Minimum power savings. Inactivity period is 1 hour in each
mode.
User define: Allows user to define PM Timers parameters to control power
saving mode.
ROM PCI/ISA BIOS (2A5LEPA9)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : User Define Primary INTR : ON
PM Control by APM : Yes IRQ3 (COM 2) : Primary
Video off Option : Suspend -> Off IRQ4 (COM 1) : Primary
Video off Method : V/H SYNC+Blank IRQ5 (LPT 2) : Primary
MODEM Use IRQ : 3 IRQ6 (Floppy Disk) : Disabled
Soft-off by PWRBTN : Delay 4 Sec IRQ7 (LPT 1) : Primary
** RM Timers ** IRQ8 (RTC Alarm) : Disabled
HDD Power Down : Disable IRQ9 (IRQ2 Redir) : Primary
Doze Mode : Disable IRQ10(Reserved) : Primary
Suspend Mode : Disable IRQ11(Reserved) : Primary
** RM Events ** IRQ12(PS/2 Mouse) : Primary
VGA : OFF IRQ13(Coprocessor) : Primary
LPT & COM : LPT /COM IRQ14(Hard Disk) : Primary
HDD & FDD : ON IRQ15(Reserved) : Disabled
DMA /master : OFF
Modem Ring Resume : Disabled
RTC Alarm Resume : Disabled
Esc : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F7 : Load Setup Defaults
éé
éé
é
êê
êê
ê
èè
èè
è
çç
çç
ç