Specifications

SCSI EP-BXBS
Page 5-8
Format Disk: Before any disk drive can be setup by the operating system it must
have a low-level format. Most SCSI devices are preformatted thus this option is not
necessary. Use this option to perform a low level format on the drive. A low-level
format destroys all data on the drive and cannot be aborted once the procedure
starts. This option is only applicable for disk drives (hard drives).
Verify Disk Media: This option will scan the selected drive’s media for defects. If
any bad areas are found you will be prompted to reassign them so they will no longer
be used. Press <Esc> at any time to abort this utility. This option is only applicable
for disk drives (hard drives).