Specifications

SCSIEP-BXBS
Page 5-5
Initiate Wide Negotiation: Specifies if the channel will attempt 16-bit instead of 8-
bit data transfers.
The default is Yes.
Options: Yes and No.
Send Start Unit Command: Specifies whether the channel will send a start unit
command to the SCSI device. This option reduces the load on the power supply if
enabled as the channel will turn on SCSI devices one-at-a-time.
The default is No.
Options: Yes and No.
BIOS Multiple LUN Support: Specifies if multiple LUNs on a SCSI device will be
supported, otherwise just LUN 0.
The default is No.
Options: Yes and No.
Include in BIOS Scan: Specifies whether the SCSI BIOS supports the device
attached with no need for additional device driver software. When set to YES the
SCSI BIOS controls the SCSI device.
The default is Yes.
Options: Yes and No.
5-4 Advanced Configuration Options
Choose the “ADVANCED CONFIGURATION OPTIONS” in the CONFIGURE/
VIEW HOST ADAPTER SETTINGS menu to display the following screen.
Figure 6: Advanced Configuration Options