Specifications

SCSI EP-BXBS
Page 5-4
5-3 SCSI Device Configuration
Choose the “SCSI DEVICE CONFIGURATION” in the CONFIGURE/VIEW
HOST ADAPTER SETTINGS menu to display following menu.
Figure 5: SCSI Device Configuration
Initiate Sync Negotiation: This selects whether or not the SCSI channel initiates
synchronous negotiation with the SCSI device. Synchronous data transfers are faster
than asynchronous data transfers.
The default is Yes.
Options: Yes and No.
Maximum Sync Transfer Rate (MB/Sec): Specifies the maximum data transfer
rate that the channel supports.
The default is 80.0.
Options: 80.0, 53.4, 40.0, 32.0, 26.8, 20.0, 16.0, 13.4, and 10.0.
Enable Disconnection: Specifies if the channel will allow the SCSI device to
disconnect from the SCSI bus.
The default is Yes.
Options: Yes and No.