Specifications

SCSI EP-BXBS
Page 5-2
5-1 Configure/View Host Adapter Settings
Selecting “CONFIGURE/VIEW HOST ADAPTER SETTINGS” displays the
screen as shown in figure 2 below. This screen allows various aspects of the
controller to be configured.
Figure 2: Configure/View Host Adapter Settings
Host Adapter SCSI ID: This option sets what ID the controller will operate at.
The default is 7.
Options: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, and 15.
SCSI Parity Checking: SCSI parity checking is used to verify the accuracy of data
transfers on the SCSI bus. Disable this option if any SCSI devices on the channel do
not support SCSI parity.
The default is Enabled.
Options: Disabled and Enabled.
Host Adapter SCSI Termination: The option configures the termination of the
LVD Ultra-2 channel. The termination of the SE Legacy channel is automatically
determined by the controller.
The default is Enabled.
Options: Disabled and Enabled.