Specifications

BIOS EP-BXBS
Page 4-16
CPUFAN Off In Suspend: This option is used to set if the CPU fans will turn off
during suspend mode.
The default is Enabled.
Enabled: The system will turn off the CPU fans during suspend mode.
Disabled: The system will not turn off the CPU fan during suspend mode.
Power Loss Recovery: If the power to the system is cut off the system will turn
itself back on with no user intervention if this option is enabled.
The default is Disabled.
Enabled: The system will power back on after a power interruption.
Disabled: The system will stay off after a power interruption.
Power On by Ring: This option is used to set the remote ring in and Wake on LAN
(WOL) features. (See section 3-5).
The default is Enabled.
Enabled: The system can use remote ring-in & WOL to wake the system up.
Disabled: The system cannot use remote ring in & WOL to wake system up.
Power On by Alarm: This option allows you to have the system turn on at a preset
time each day or on a certain day. This option is only available when Power Loss
Recovery is Enabled.
The default is Enabled.
Enabled: The system will turn on at the preset time.
Disabled: The system will not turn on until you turn it on.
Date (of month) Alarm: This is how you set the date that the system will turn on.
The default is 0.
0: System will turn on everyday on preset time.
1-31: Represents the day of the month that you need the system to turn on.
Time (hh:mm:ss) Alarm: This sets the time that you need the system to turn on.
The default is 08:00:00.
**Reload Global Timer Events **
These options allow the user to reset the global power features timer if any of the
enabled events occur.
IRQ [3-7, 9-15], NMI: The default is Disabled.
Primary IDE 0: The default is Disabled.