Technical information

4-6 CHAPTER 4
4-3 Chipset Features Setup
Choose the "CHIPSET FEATURES SETUP" in the CMOS SETUP UTILITY menu to
display the following menu.
ROM PCI/ISA BIOS(2A59IPAB)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
Figure 4-4 CHIPSET FEATURES SETUP
C8000 - CBFFF Shadow :
CC000 - CFFFF Shadow:
D0000 - D3FFF Shadow:
D4000 - D7FFF Shadow:
D8000 - DBFFF Shadow:
DC000 - DFFFF Shadow:
These categories determine whether other expansion card optional ROM will be
copied to RAM by 16K byte or 32K byte per unit and the size depends on chipset. If
you install other expansion cards with ROMs on them, you will need to know which
addresses the ROMs use to shadow themselves specifically.
Enabled : Optional shadow is enabled.
Disabled: Optional shadow is disabled.
Auto Configuration : Enabled CPU Warning Temperature : 60C/140F
DRAM Timing : 60ns Current cpu Temperature : 38C/100F
DRAM Leadoff Timing : 10 / 6 / 3 Current System Temp : 32C/90F
DRAM Write Burst Timing : x333 Current PWR SUP FAN Speed : 0 RPM
Fast EDO Lead Off : Enabled Current CPU FAN Speed : 5578 RPM
Refresh RAS# Assertion : 4 Clks Current Chiassis FAN Speed : 0 RPM
Fast RAS To CAS Delay : 2 Vcore(v): 2.8V Vcore(v) : 2.80V
DRAM Page Idel Timer : 2 Clks V I/O(v) : 3.50V +5(v) : 5.16V
DRAM Enhanced Paging : Enabled +12(V) : 12.28V -12(v) : 11.90V
Fast MA to RAS# Delay : 2 Clks -5(v) : 5.10V
SDRAM (CAS Lat/RAS-to-CAS) : 2/2
SDRAM Speculative Read : Disabled
System BIOS Cacheable : Disabled
Video BIOS Cacheabled : Enabled
8 Bit I/O Recovery Time : 1
16 Bit I/O Recovery Time : 2
Memory Hole At 15M-16M : Disabled
PCI 2.1 Compliance : Disabled
ESC : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F7 : Load Setup Defaults
Auto Configuration: Selects predetermined optinal values of chipset parameters.
When Disabled, chipset parameters revert to setup information stored in COMS.
Many fields in this screen are not available when Auto Configuration is Enabled.