Technical information

User Notice

No part of this product, including the product and software may be reproduced, transmit-

ted, transcribed, stored in a retrieval system, or translated into any language in any form

by any means with the express written permission of EPoX Computer Company (herein-

after referred to as EPoX) except documentation kept by the purchaser for backup

purposes. EPoX provedes this manual "as is" without warranty of any kind, either express

or implied, including but not limited to the implied warranties or conditions of

merchantability or fitness for a particular purpose. In no event shall EPoX be liable for

any loss or profits, loss of business, loss of use or data, interruption of business or for

indirect, special incidental, or consequential damages of any kind, even if EPoX has been

advised of the possibility of such damages arising from any defect or error in the manual

or product. EPoX may review this manual from time to time without notice. For updated

BIOS, drivers, or products release information you may visit EPoX’s home page at:

http://www.epox.com.

Products mentioned in this manual are mentioned for identification purposes only. Prod-

uct names appearing in this manual may or may not be registered trademarks of copy-

rights of their respective companies.

The product name and revision number are both printed on the mainboard itself.

Handling Procedures

Static electricity can severely damage your equipment. Handle the EP-5ATXA-M

and any other device in your system with care and avoid contact with components on the

card. Always work on an antistatic surface to avoid possible damage to the card from

static discharge. The packing material placed on a table top makes a good antistatic

work surface. We assume no responsibility for any damage to the EP-5ATXA-M

mainboard that results from failure to follow installation instructions or failure to observe

safety precautions.

CAUTION

The EP-5ATXA-M mainboard is subject to

damage by static electricity. Always

observe the handling procedures.