User`s manual

BIOS
Page 4-26
into each of the sub menu that follows this field.
The choice: Auto(ESCD), Manual.
PCI/VGA Palette Snoop
Leave this field at Disabled.
The Choice: Enabled, Disabled.
PCI Latency Timer (CLK)
The latency timer defines the minimum amount of time, in PCI clock cycles, that the
bus master can retain the ownership of the bus.
The Choice: 0 ~ 255.
AGP SLOT, AC97/MC97, PCI SLOT1, PCI SLOT2, PCI SLOT3, Onboard
LAN INT Assignment
These settings allows the user to specify what IRQ will be assigned to PCI devices in
the chosen slot. The default is Auto.
The Choice: Auto, 3, 5, 7, 9, 10, 11, 12, 14 & 15.
IMPORTANT! If using PCI cards on shared slots, make sure that the drivers
support “Shared IRQ” or that the cards don’t need IRQ
assignments. Conflicts will arise between the two PCI groups
that will make the system unstable or cards inoperable.
Interrupt request are shared as shown the table below:
INT A INT B INT C INT D INT E INT F INT G INT H
AGP Slot



AC97/MC97



Slot 1



Slot 2



Slot 3



Onboard LAN



Onboard USB 1



Onboard USB 2



SM BUS


