User`s manual

BIOS
Page 4-17
On Board I/O Chip Setup
Power On Function
There are “Button Only”, “Hot Key” , “Mouse Left”, “Mouse Right”and “Any
key” can be chosen by this field that allows users to select one of these various
functions as Power On Method for their requirement. The default value in this
selection is “ Hot Key”. (Ctrl-F1)
Hot Key: User can press “Control Key” (Ctrl) and “Function Key” (from
F1 to F12) individually to power on the system. The interval
between “Ctrl” key and function Key (F1-F12)must be short.
Anykey: Press anykey to power on the system.
Mouse Left: Press Mouse Left to power on the system.
Mouse Right: Press Mouse Right to power on the system.
Button Only: This power on function controlled by J3 (pw-on.) Use Power On
Button to power on the system.
Password: User can Power On the System by password, the password can be
entered from 1 to 5 characters. The maximum of password is 5
characters. If user forget / lost the password, please turn off the
system and open case to clear CMOS by JCMOS to re-setting
the power on function. When set the password to turn on the
system, than can’t power on by J3(PW-ON).