User`s manual

BIOS
Page 4-8
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power up the computer.
If it is set to Enable, BIOS will shorten or skip some check items during POST.
The choice: Enabled, Disabled.
APIC Mode
This item allows you to enable or disable the Advanced Programmable Interrupt
Controller.
The choice: Enabled, Disabled.
MPS Version Control For OS
1.4: For Windows 2000.
1.1. For WinNT4.
Boot Seq & Floppy Setup
First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in the sequence
selected in these items.
The Choice: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,
ZIP100, LAN, Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive name
assignments.
The choice: Enabled/Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.
The choice: Enabled/Disabled.