User`s manual

Installation
Page 3-13
Section 3-5
External Modem Ring-in Power
ON and Keyboard Power ON
Functions (KBPO)
On the basis of bounded functions in I/O chipset, the two serial ports are able to
support the External Modem Ring-in Power ON function. Once users connect the
external modem to COM1 or COM2, the mainboard allows users to turn on their
system through the remote and host's dial-up control.
Exclusive Keyboard Power ON Function
To innovate a unique feature to benefit users, we devoted the easiest and most
convenient way to turn on your system based on the the ATX power supply.
How to work with it
Step 1: Please check JKBPO at the position 1-2 after you finish the system
installation.
Step 2: Push the momentary switch (J3 PW-ON) to turn on your system and then
push again to hold for more than 4 seconds to turn it off after counting
memory as soon as you turn it on.
Step 3: You can enjoy the Keyboard Power ON function (KBPO) by pressing
any 1 key, Hot key (Ctrl-F1, F2.....F12), Password (A maximum of 5
charac ters can be entered.), BUTTON only...etc. to turn on your
system. Please refer to the BIOS Integrated peripherals setup for
detail. The BIOS Default is keyboard Hot key <Ctrl> - <F1> to turn
on the system. Your system will be turned on automatically, after
releasing the keys. To power off your system, you can use the Soft-OFF
function under Windows 95/98/2000.
Keyboard Power On Function
1-2 Enabled
2-3 Disabled (Default)
JKBPO
1