User`s manual

Installation
Page 3-9
FDD1: Floppy Controller Connector (Black
color)
IDE1: Ultra DMA-66/100 Primary IDE
Connector (Blue color)
IDE2: Ultra DMA-66/100 Secondary IDE
Connector (Blue color)
CD_IN: CD Audio_IN Connector
CD_IN_Left
1
CD_IN_Right
CD_Reference
CD_IN
MODEM_IN
Modem_Out
1
Modem_IN
GND
PW1: ATX or ATX12V Power Connector
 20-pin power connector
PW2: ATX12V Power Connector
 12V 4-pin power connector
29
29
Note: The board requires a minimum of 250 Watt
ATX or ATX 12V power supply to operate.
Your system configuration (amount of
memory, add-in cards, peripherals, etc.) may
exceed the minimum power requirement but
to ensure that adequate power is provided, use
a 300 Watt (or greater) ATX or ATX 12V
power supply.
MODEM_IN: Telephony Connector for Modem
audio output