User`s manual

Installation
Page 3-4
Figure 3
Step 4
Install the Fan Heatsink.
* Please do apply thermal compound
between CPU and Heatsink.
Step 5
Install the Shroud Assembly and follow
the arrow of Figure 5 for press the two
Clip Assembly.
Step 6
Make sure the CPU fan is plugged to the
CPU fan connector. The installation is
completed.
Figure 4
Figure 5
Figure 6
NOTE:
1. Intel Pentium
TM
4 processor might be crashed if installed with a regular CPU Fan
since it is equipped with all new micro- architecture that brings quite small size of
CPU(Die). We recommend using Intels reference design thermal solution which is
an active heatsink; an extruded aluminum heatsink based and a fan attached to the
top on the fin array.
Additionally, please do apply heatsink thermal compound or paste and install CPU
fan to avoid CPU overheated and damaged.
2. According to the guidance of Intel Corp, please do not install the same CPU over 50
times as it will bend the pins and damage the CPU.
Step 3
Close the socket by lowering and
locking the actuation lever.