Specifications

InstallationEP-MVP3G-M/2/5
Page 3-3
Easy Installation Procedure
The following must be completed before powering on your new system:
3-1. Configure Jumpers
3-2. System Memory Configuration
3-3. Device Connectors
3-4. External Modem Ring-in Power On and Keyboard Power On
Function (KBPO)
Section 3-1
Configure Jumpers
We design this motherboard with the fewest jumpers to make your install fast and
easy.
Note: The jumpers as shown below are in their correct physical orientation.
(Figure 1)
JP1
CMOS Clear
1-2: Normal (Default)
2-3: Clear CMOS
JP5
SDRAM Clock Selection
1-2: SDRAM = AGP (2/3 CPU Clock)
2-3: SDRAM = CPU (Default)
JP4
Keyboard Power-ON Function
1-2: Disabled (Default)
2-3: Enabled