Specifications

FeaturesEP-3VCA
Page 2-1
Section 2
FEATURES
EP-3VCA Features:
 EP-3VCA is based on the Socket 370 Processors including PPGA & FC-
PGA operating at 300 ~ 700MHz. The board is configured by an ESSJ
(Easy-Setting-Single-Jumper) to match your CPU clock speed.
 Designed with VIA Apollo Pro 133A PCIset.
 Supports up to 768MB of DRAM (minimum of 32 MB) on board (please
see Section 3-2).
 EP-3VCA will support Error Checking and Correcting (ECC) when using
parity SDRAM memory modules. This will detect multiple bit errors and
correct 1-bit memory errors.
 Supports (1) 16 bit ISA slots, (5) 32 bit PCI slots, (1) 4X AGP slot, (1) AMR
slot and provides (2) independent high performance PCI IDE interfaces
capable of supporting PIO Mode 3/4 and Ultra DMA 33/66 devices.
The EP-3VCA supports (5) PCI Bus Master slots and a jumperless PCI
INT# control scheme which reduces configuration confusion when plugging
in PCI card(s).
 Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary
IDE interfaces.
 Designed with on chip Multi I/O: (1) floppy port, (1) parallel port (EPP,
ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese Floppy 3 mode is also supported
 Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released. (http://www.epox.com/
please visit our Technical Support section for the latest updates).