Specifications

BIOS
EP-3VBM+
Page 4-13
MODEM Use IRQ:
Name the interrupt request (IRQ) line assigned to the modem (if any) on your
system. Activity of the selected IRQ always awakens the system.
Default is IRQ 3.
N/A: No IRQ is used. 3: IRQ 3
4: IRQ 4 5: IRQ 5
7: IRQ 7 9: IRQ 9
10: IRQ 10 11: IRQ 11
The EP-3VBM+ supports HDD Power Down, Doze and Standby power
saving functions when using the Intel Pentium II Processor.
The default is Disabled
Soft-Off by PWR-BTTN:
Use this to select your soft-off function.
The default is Delay 4 sec.
Instant Off: Turns off instantly.
Delay 4 Second : Turns off after a 4 second delay. If momentary press of
button, the system will go into Suspend Mode. Press again
to take system out of Suspend Mode.
PWRON After PW-Fail:
The system will stay of or power on after a power interrupte.
The default is Fomer-Status.
Fomer-Status: Stay off or power on depend on system safe shut-down or
power fail.
ON: System always power on after a power interrupte.
OFF: System always stay off after a power interrupte.
HDD Power Down:
HDD Standby timer can be set from 1 to 15 minute(s).
Doze Mode:
The Doze mode timer starts to count when no PM events have occurred.
Suspend Mode:
This function works only when the Pentium II Processor is installed. The
timer starts to count when System Standby mode timer is timed out and no
PM Events are occurring. Valid range is from 1 minute up to 1 hour.