Specifications

BIOS
EP-3VBM+
Page 4-11
OnChip USB:
Select Enabled if your system contains a Universal Serial Bus(USB) controller
and you have a USB peripheral.
USB Keyboard Support:
This controls the activation status of an optional USB keyboard that may be
attached.
The default is disabled.
Enabled: Enable USB keyboard support.
Disabled: Disable USB keyboard support.
OnChip Sound:
Turn on/off onchip sound device.
OnChip Modem:
Turn on/off onchip software modem device.
4-4 Power Management Setup
Choose the POWER MANAGEMENT SETUP in the CMOS SETUP UTIL-
ITY to display the following screen. This menu allows the user to modify the
power management parameters and IRQ signals. In general, these parameters
should not be changed unless its absolutely necessary.
Figure 5: Power Management Setup
ROM PCI/ISA BIOS (2A6LGPAA)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI function : Enabled
Power Management : User Define
PM Control by APM : Yes
Video off After : Suspend
Video off Method : V/H SYNC+Blank
MODEM Use IRQ : 3
Soft-off by PWRBTN : Delay 4 Sec
PWRON After PW-Fail : Former-Status
HDD Power Down : Disable
Doze Mode : Disable
Suspend Mode : Disable
** PM Events **
VGA : OFF
LPT & COM : LPT/COM
HDD & FDD : NO
DMA/master : OFF
Modem Ring Resume : Disabled
RTC Alarm Resume : Disabled
Esc : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F7 : Load Setup Defaults
ÏÏ
ÏÏ
Ï



ÐÐ
ÐÐ
Ð



ÎÎ
ÎÎ
Î



ÍÍ
ÍÍ
Í
Primary INTR : ON
IRQ3 (COM 2) : Primary
IRQ4 (COM 1) : Primary
IRQ5 (LPT 2) : Primary
IRQ6 (Floppy Disk) : Primary
IRQ7 (LPT 1) : Primary
IRQ8 (RTC Alarm) : Disabled
IRQ9 (IRQ2 Redir) : Secondary
IRQ10 (Reserved) : Secondary
IRQ11 (Reserved) : Secondary
IRQ12 (PS/2 Mouse) : Primary
IRQ13 (Coprocessor) : Primary
IRQ14 (Hard Disk) : Primary
IRQ15 (Reserved) : Disabled