User`s manual

BIOS
Page 4-13
IDE HDD Block Mode
IDE Block Mode allows the controller to access blocks of sectors rather than a
single sector at a time. The default is Enabled.
Enabled: Enable IDE HDD Block Mode. Provides higher HDD transfer rates.
Disabled: Disable IDE HDD Block Mode.
Onboard PCI Device Setup
Scroll to Onboard PCI Device Setup and press <Enter>. The following screen
appears:
USB Controller
Enables the all USB controller.
Options: Disabled, Enabled.
USB 2.0 Controller
Enables the EHCI (USB2.0) controller.
Options: Disabled, Enabled.
USB Keyboard Support
Your system contains a Universal Serial Bus (USB) controller and you have a
USB keyboard. The default is Auto detect.
Options: Auto, Enabled, Disabled.
USB Mouse Support
Your system contains a Universal Serial Bus (USB) controller and you have a
USB Mouse . The default is Disabled.
Options: Enabled, Disabled.