User`s manual

BIOS
Page 4-6
Typematic Rate (Chars/Sec)
This is the number of characters that will be repeated by a keyboard press. The
default is 6.
Options: 6 ~ 30 characters per second.
Typematic Delay (msec)
This setting controls the time between the first and the second character displayed
by typematic auto-repeat. The default is 250.
Options: 250/500/750/1000 msec.
Security Option
This category allows you to limit access to the System and Setup, or just to Setup.
The default is Setup.
System: The system will not boot and the access to Setup will be denied if the
correct password is not entered at the prompt.
Setup: The system will boot; but the access to Setup will be denied if the
incorrect password is not entered at the prompt.
OS Select For DRAM > 64 MB
Some operating systems require special handling. Use this option only if your
system has greater than 64 MB of memory. The default is Non-OS2.
OS2: Select this if you are running the OS/2 operating system with greater
than 64 MB of RAM.
Non-OS2: Select this for all other operating systems and configurations.
Boot Seq & Floppy Setup
Scroll to Boot Seq & Floppy Setup and press <Enter>. The following screen
appears: