User`s manual

Installation
Page 3-6
Section 3-3
System Memory Configuration
Memory Layout
The mainboard accommodates two PC1600/PC2100/2700 184-pin DIMMs (Dual
In-line Memory Modules):
 Supports up to 2.0GB of 200/266/333MHz DDR SDRAM.
 Supports up to 2 DDR DIMMs (refer to Table 1).
 Supports DDR 200/266/333 unregistered 184-pin non-ECC DDR SDRAM
DIMMs.
 Supports configurations defined in the JEDEC DDR DIMM specification
NOTE:The mainboard does not support double-sided x 16 DDR DIMMs. Use DDR
SDRAM (Double-Data-Rate Synchronous DRAM) modules only.
Figure 7 and Table 1 show several possible memory configurations.
NOTES:
_ Using non-compliant memory with higher bus speeds (overclocking) may
severely compromise the integrity of the system.
<Figure 7>
<Table 1>
* DDR SDRAM supports 64, 128, 256, 512MB and 1GB DIMM modules using
512Mb technology.
DDR DIMM 1
DDR DIMM 2
Bank 0/1
DDR
Synchronous
DRAM
Bank 2/3
yromeMlatoT
1MMIDRDD
)1/0knaB(
2MMIDRDD
)3/2knaB(
BG1=
mumixaM
*MARDSRDD
,BM652,BM821,BM46
1X*BG1,BM215
enoN
BG2=
mumixaM
*MARDSRDD
,BM652,BM821,BM46
1X*BG1,BM215
*MARDSRDD
,BM652,BM821,BM46
1X*BG1,BM215