Specifications

Installation EP-6WEA4/4I
Page 3-8
cable will be shipped with the boxed processor to draw power from a power
header on the mainboard’s J4.
Now we are ready to install the SEC Cartridge (Pentium II/III Processor) into the
Retention Module. The SEC Cartridge is mounted by sliding the SEC Cartridge into
the Retention Module and letting it slide all the way down. Once it reaches the
bottom make sure you press firmly on SEC cartridge to firmly secure into the Slot 1
Socket.
Processor
Core Frequency
(MHz)
System Bus
Frequency
(MHz)
L2 Cache Size
(Kbytes)
L2 Cache Type CPUID
3
533EB
1
533 133 256 ATC
2
068xh
550E
1
550 100 256 ATC
2
068xh
600E
1
600 100 256 ATC
2
068xh
600EB
1
600 133 256 ATC
2
068xh
650E
1
650 100 256 ATC
2
068xh
667EB
1
667 133 256 ATC
2
068xh
700E
1
700 100 256 ATC
2
068xh
733EB
1
733 133 256 ATC
2
068xh
The table listing all Coppermine processor identification
Notes:
1. “B” -- 133MHz System Bus Frequency
“E” -- Processor with “Advanced Transfer Cache “ (CPUID 068xh).
2. ATC = Advanced Transfer Cache. ATC is an L2 Cache integrated on the same
die as the processor core. With ATC, the interface between the processor core
and L2 Cache is 256-bits wide, runs at the same frequency as the processor
core and has enhanced buffering.
3. The Pentium
®
III Processor Specification Update for the exact CPUID for
each processor.