User's Manual
Table Of Contents
- Chapter One Introduction to Bluetooth
- Chapter Two Installation
- Chapter Three Basic Operations
- Chapter Four Client Appliance
- Chapter Five Local Services
- Chapter Six Configuration Panel
- _
- Accessibility Tab
- Discovery Tab
- General Configuration Settings
- Hardware Configuration
- Plug in Dongle
- Information Exchange Configuration Settings
- Local Services Tab
- Notifications Tab
- Chapter Seven Security
- Chapter Eight Troubleshooting
- FCC Notices
EpoX BlueTooth Dongle User’s Guide
8
INSTALL BTW
Windows 98 Second Edition (SE) and
Windows Millennium Edition (Me) BTW
requires that a number of Microsoft®
Windows® networking components be
installed before BTW can be successfully
configured. If Windows 98SE or
Windows Me was installed without the
networking components, have the MS
Windows CD available during the BTW
installation process. Under normal
Windows 2000 installations you should
not be prompted for the Windows CD;
however you may want to have it on
hand.
Install Shield Wizard
Installing BTW is an automated process
made easy by the use of the Install Shield
Wizard. You will need to:
Read and acknowledge the License
Agreement.
Fill in some customer information,
including the License Key.
Fill in some device information.
Make a few choices
Install Shield will uninstall the previous
version of BTW, copy the required files,
install drivers and virtual COM ports, set
up the system registry, and register
services.
Complete these steps to install BTW:
1. Exit all applications.
2. Insert the EPoX BTW CD. The auto-run
option will start and the Install Shield
Wizard setup dialog box is displayed. If
auto-run does not occur, manually start
the setup process—from the Windows
taskbar, click Start followed by Run and