User's Manual

EpoX BlueTooth Dongle User’s Guide
37
To add a device to the list of devices to be
discovered, that device must be within
range of the Bluetooth radio; devices that
are not within radio range will not appear
in the list of devices in the Discoverable
devices... dialog box.
Report only a specific class of device
 From the Bluetooth Configuration Panel,
on the Discovery tab, select "Report
only selected Bluetooth devices" from
the drop-down list and then click the
Add Device button.
 In the Discoverable devices... dialog box,
select "Allow this computer to discover
specific devices or types of devices
within a class."
 From the Class drop-down list, select a
class of devices to be discovered.
 Click the OK button.
Report only a specific a type of
device within a class
 Configure Bluetooth for Windows to
report the class of device that the type of
device belongs to (follow the steps in
"Report only a specific class of device,"
above, but do NOT click the OK
button).
 In the Discoverable devices... dialog box,
from the Type drop-down menu select
the specific type of device to be
reported.
 Click the OK button.
Discovery, Deleting Specific
Devices
Remove a device from the list of
devices to be discovered
In the Bluetooth Configuration Panel,
from the Discovery tab, select the device
to be removed and click the Delete
button.
If "Report only selected Bluetooth
devices" is not selected the Delete button
will not be available.
Temporarily override the discovery of
specific devices
In the Bluetooth Configuration Panel,
from the Discovery tab, select "Report all
Bluetooth devices." The specifically
selected devices will be discovered along
with all other devices.
To re-enable specific device discovery
re-select "Report only selected Bluetooth
devices."
When all devices are deleted an error
message will appear if report all
Bluetooth devices is not selected.