User's Manual
Table Of Contents
- Chapter One Introduction to Bluetooth
- Chapter Two Installation
- Chapter Three Basic Operations
- Chapter Four Client Appliance
- Chapter Five Local Services
- Chapter Six Configuration Panel
- _
- Accessibility Tab
- Discovery Tab
- General Configuration Settings
- Hardware Configuration
- Plug in Dongle
- Information Exchange Configuration Settings
- Local Services Tab
- Notifications Tab
- Chapter Seven Security
- Chapter Eight Troubleshooting
- FCC Notices
EpoX BlueTooth Dongle User’s Guide
23
communications ports and then use that
connection as if it were a hardwired serial
cable between the devices.
To establish a Bluetooth serial port
connection
Connections are initiated from the client:
On the client, in the Folders pane of My
Bluetooth Places, select Entire Bluetooth
Neighborhood.
In the right pane of My Bluetooth Places,
double-click Bluetooth Serial Port. A
dialog box appears that contains the
communications port number assigned
to this connection by the client. The
application that will use this connection
must be configured to send data to this
port.
In the right pane of Entire Bluetooth
Neighborhood, right-click anywhere
except on a device name and select
Refresh from the pop-up menu.
In the Folders pane of My Bluetooth
Places, right-click the server you want to
establish a connection with and select
Discover Available Services from the
pop-up menu to update the available
services list. The available services will
be displayed in the right pane of My
Bluetooth Places.
Depending on the security configuration,
the dialog box that provides
communications port information may
not appear until after Authentication and
Authorization have been accomplished.