Installation Guide

4
/
8
Step 4: Secure Sink to Countertop. Use a bead of silicone (or preferred adhesive) around
the rim of the sink/countertop underside. Check the alignment of the sink to the cutout
in the countertop. Place sink over cutout hole and press firmly.
Step 2 : Cut the opening in the countertop by carefully following the traced line. Pls
use the appropriate saw that best fits your countertop material.
Step 3 : Drill Hole in Countertop. Turn the countertop over and drill 3/8” diameter x 1/2”
deep hole in the countertop, mounting holes should be ½” from edge of sink. Insert
anchors into drilled holes and lightly tap with a hammer until flush.