Specification

Before Installation
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for
small parts, which may have come loose inside the carton during shipment. Identify and count all
items according to the PARTS LIST and/or HARDWARE LIST shown below. Check you have all the
components and tools listed on the following pages.
• We recommend that you assemble this product with the assistance of another person; this will
make the assembly easier, and will help eliminate damage to the product or injury to persons during
assembly.
• Please do not over tighten screws or bolts until the assembly is completed.
• Keep children and animal away from the work area, small parts could choke if swallowed.
• Please put all parts on a non-abrasive floor before assembly,and follow the assembly steps to
assemble your newly purchased product correctly and efficently.
Important – Please read these instructions fully before starting assembly
Cam Lock Assembly Instructions
Insert Cam Bolt into hole as shown in diagram A.
Make sure not to insert the Cam Bolt:
Too deep as shown in figure B as this will cause
the Cam Lock to be misaligned and unable to
interlock properly.
Also avoid inserting the Cam Bolt too close to the
surface of the hole as shown in figure C, as this
will cause the Cam Lock to be too loose, and not
interlock properly.
Connect the panels together.
Insert the Cam Lock so the side opening fits over
the head of the Cam Bolt.
To tighten the Cam Lock, turn it clockwise on half
a turn with a flat screwdriver.
*Do not use an automatic screwdriver as it may
bend or break if too much power is imposed.