Installation Guide

4
1/8”
Tub wall
3. Place a level across the boom of the tub and adjust the tub feet leveler to touch the level. Then raise the
leveler addional 1/8” or 3/16” so that the weight of the tub, water and user are fully supported by the feet
adjuster and not the tub walls.
4. Measure and cut the tail piece to the appropriate length to reach the trap adapter When se
P-trap
ng the tub
drain, insert tail piece with 1-1/2" slip joint and rubber washer into the trap adapter and tighten properly.
Tub feet leveler