Set up guide A step-by-step guide to walk you through the process of setting up your Epos Now system. www.eposnow.
Welcome Thank you for choosing to power your business with Epos Now. Your new POS terminal comes pre-installed with all the software you need, so you can be up-and-running in a matter of minutes. Follow the simple steps in this guide, and start running your business in the way you’ve always wanted. If you have any problems, please feel free to contact our Support Team.
Welcom What’s in the box? Your box contains everything you need to start trading.
Assembling the terminal stand Once you’ve unpacked the terminal stand, start by attaching the base. Place the terminal onto a clean and solid surface, with the screen facing downwards. 4 Slot the base onto the bottom of the stand, and tighten the four screws until they are secure.
Connecting the power Connect the Power Cable into the power brick, and plug it into the wall. With the terminal still face down on a flat surface, turn the stand to a 90-degree angle. Feed the power cable through the gap in the base of the terminal stand, and insert it into the power cable port on the bottom of the terminal. Turning on your POS system To turn on your POS terminal, simply press the power button on the right-hand side of the terminal.
Setting up your POS system Set-up Wizard After switching on, you will be greeted with our Set-up Wizard which will guide you through the login process, connecting to the internet & adding accessories. Simply follow these steps and enjoy a speedy set-up. Note: If you want to make changes to your network or add additional accessories after the initial use of the Set-up Wizard, please follow the steps from page 7 onwards.
Already set up? Completed the Wizard? You may want to make changes in the future. Follow the guide below to assist with these future alterations. Connecting to the internet - WiFi Step 1 Step 2 Step 3 To connect to WiFi on Android, simply swipe down from the top of the screen and hold the WiFi logo untill WiFi menu appears. Turn on WiFi, and choose your WiFi network. Enter your WiFi password and hit connect. Once you’ve connected to your network, navigate back to the start screen and hit ‘retry’.
Your Receipt Printer Remove the printer from its packaging, and connect the power brick to the cable. Then insert the power cable into the back of the printer. Take the USB cable and insert it into the back of the printer. Next, take the other end of the USB cable and insert it into the top left USB port in the panel at the bottom of the terminal. Open the printer by pressing the grey button to the left of the logo, as highlighted in the diagram.
Your Cash Drawer Take the hard wired cable from the back of the cash drawer, and plug it into the the back of the receipt printer. The cash drawer does not need a separate power adapter. Unlock the cash drawer with the set of keys provided by turning them horizontally. Note: it’s important to keep these keys safe - they are unique to your cash drawer and cannot be replaced.
Thank you Thank you for choosing to power your business with Epos Now. For more tips and tricks on how to get the most out of your system, please visit our resources hub at: epos.tips Need more assistance? Simply open your phone camera and scan the QR code to be taken through to our knowledge base, where you can find detailed setup instructions for all of our products.