Specifications
DSEA A/S
Kongebakken 9, DK-2765 Smørum, Denmark, www.eposaudio.com, Printed in China, 01/21, 770-00322/A01
EN
CANADA & USA
Statements regarding FCC and
Industry Canada
This device complies with Part 15 of the FCC rules and with
Industry Canada license-exempt RSS standard(s). Operation is
subjected to the following two conditions::
1) This device may not cause harmful interference, and
2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20 cm between the
radiator and your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
The device for operation in the band 5150–5250 MHz is only for
indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems.
RF Radiation Exposure Information
The device complies with FCC and Innovation, Science and
Economic Development Canada’s RF radiation exposure limits
set forth for uncontrolled environment. The product should be
installed and operated with minimum distance of 20 cm between
the radiator and your body. Use of other accessories not veried
by the manufacturer may not ensure compliance with FCC and
Innovation, Science and Economic Development Canada’s RF
exposure guidelines.
Further RF exposure reduction can be achieved if the product can
be kept as far as possible from the user body or set the device to
lower output power if such function is available.
The transmitters must not be co-located or operated in conjunction
with any other antenna or transmitter.
FR
CANADA
L’émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Cet équipement est conforme aux limites d'exposition aux
radiations IC CNR-102 établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec une
distance minimale de 20 cm entre le radiateur et votre corps.
Le dispositif utilisé dans la bande 5150-5250 MHz est réservé à
une utilisation en intérieur an de réduire le risque de brouillage
préjudiciable aux systèmes mobiles par satellite dans le même
canal.
Information sur l’exposition aux radiofréquences
Cet équipement est conforme aux limites d‘exposition aux
rayonnements d’Innovation, Sciences et Développement
économique Canada établies pour un environnement contrôlé /
non contrôlé. Cette station de base/dongle doit être installé et
utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.
L‘utilisation d‘autres accessoires non homologués par le fabricant
remet en cause la conformité des normes imposées par la
d’Innovation, Sciences et Développement économique Canada.
Une réduction supplémentaire de l’exposition aux RF peut être
obtenue si le produit peut être maintenu aussi loin que possible du
corps de l’utilisateur ou si l’appareil est réglé sur une puissance de
sortie inférieure, si cette fonction est disponible.
Les transmetteurs ne doit pas etre place au meme endroit ou utilise
simultanement avec un autre transmetteur ou antenne.
Responsible party
Demant Sound USA, Inc.
Little Falls Drive, Wilmington 19800, New Castle, USA
Tel: +1 800-332-7439
EXPAND VISION 3T
EXPAND VISION 3 (EWBT1)
VISION-RC 01T
VISION-RC01 (SCBT24)
SP 30T (SCBT9)
USA
FCC ID: R3UEWBT1 FCC ID: R3USCBT24 FCC ID: R3USCBT9
Canada
IC: 2099D-EWBT1
CAN ICES-3(B)/NMB-3(B)
IC: 2099D-SCBT24
IC: 2099D-SCBT9
CAN ICES-3(B)/NMB-3(B)
Europe
A w A
v
w A
v
w
United
Kingdom
Australia/
New Zealand
I
Singapore
Complies with
IMDA Standards
DA108496
In compliance with:


