Installation guide


Connect any Universal Serial Bus (USB) devices to USB Connector (ICON).
PHOTO

If you are one of a client in the network system. Connect a RJ-45 network cable
to 10/100M LAN connector (ICON).
PHOTO

Connect any Serial devices to Serial Port connector (ICON).
PHOTO

If you have Modem installed in your E-820. Connect a RJ11 telephone line to
Phone Jack (ICON). Modem is an optional device in E-820 computer.
PHOTO

Connect any optional devices, such as external speakers, earphone or
microphone to External Speaker (ICON), Earphone (ICON) or Mic In (ICON).
PHOTO
3.3.4
Connect the power cord to power adapter’s AC connector.
PHOTO
3.3.5
Ensure all cables and connectors are connected properly. Then plugs the power
cord into properly grounded electrical outlet.
PHOTO
3.3.6
You are ready to turn on your E-820 Computer now.
Notes:
The AC adapter converts AC power to the DC power required by E-820 series computer. It
works with electrical outlets worldwide. However, power connectors vary among countries. Before
you use AC power in your country. you may need to obtain a new power cable adapter designed for