Installation guide

3.
Chapter 2: Setting up at the beginning
This chapter provides information from unpack, realizes and connecting cables to your E-820.
3.1
Unpacking your E-820
Please make sure the following items are included with your E-820. If you find that any
of these items are missing or appear damaged, please contact your dealer immediately.
3.1.1
E-Panel E-820 LCD Computer * 1 unit
3.1.2
PS/2 Key 107 Key keyboard * 1 unit
3.1.3
PS/2 Optical Mouse * 1 unit
3.1.4
Auto switch AC power adapter and power cord * 1 set
3.1.5
E-Panel LCD Computer Driver Disc * 1 piece
3.1.6
RJ-11 Telephone Cable * 1 piece
3.1.7
Hard Disk and CD-ROM screws * 1 set
3.2
Realizes your E-820
Select a location for the E-820 where it will remain dry. Leave about 20mm (2in.) of
space around the computer for proper air circulation.
PHOTO of LAYOUT including the item name. (switch, jack)
3.3
Connecting Cables
This section provided information to help you connect the cables properly.
3.3.1
Connect the keyboard cable to purple keyboard connector (ICON) and the mouse
cable to the black mouse connector (ICON).
PHOTO OF KEYBOARD AND MOUSE
3.3.2
Connect the power adapter output cable to power connector (ICON).
PHOTO OF POWER
3.3.3
Connect other additional devices you have: