Installation guide

On Self Test) tests the memory of the PC and reports the total memory installed. It also checks
the processor type and speed, the hard disk type and the CD-ROM type. Normally, POST runs
very quickly and do not see the results if no error in the self test. Otherwise, you will see the
error message of the device.
You can use the troubleshooting table below to find solutions to problems that have definite
symptoms.
Problem Description Solutions
General Power LED not light on

Ensure the power adapter’s AC and DC
connectors are securely connected to proper
connectors on the E-820
Power LED light on but
blank screen
Flashing cursor

Contact your local technical support
Can not loading OS
continuously

If you have just added new software or a new
device. Try to remove it.
Memory The amount of memory
displayed is incorrect

Be sure installed the correct type of DDR
memory and securely inserted in the socket.

In additional, this system features an
integrated video system in which some
memory is used by the video controller.
Windows will only report the memory
available for its use.