Installation guide

5.3.5.8
The installation completed. Now, you can setup the touch screen by
choosing the functions in Main Console.
5.3.5.9
The installation completed.
5.4
Chapter 5: Removing and Replacing Parts
E-panel E820 LCD Computer is a fully equipped desktop. It integrates the LCD display
and all the other computer parts into the LCD case. Besides, most of the interfaces are
on the back of the computer base that makes the outline neat and fluid.
There are three components can be remove or replace by yourself. To remove or replace
those options in your E-820. You will need a Phillips Head Screwdriver.
Before you do the replacement. Please disconnect the DC power connector. Check the
parts and the configuration of your E-820 carefully. For more details, please refer to the
Installation Guide we provided.
6.
Chapter 6: Take care of your E-820
This Chapter provides information to help you in the day-today use of your E-820.
6.1
Basics
Here are some basic points about keeping your computer functioning properly
.

Keep your E-820 in a clean, dry environment. Make sure it rests on a flat, sturdy
surface.

Do not cover any of the vents in the computer. These vents allow air flow to keep
your E-820 from overheating.

Keep food and drinks away from all parts of your E-820. Food particles and spills
might make the keyboard and mouse sticky and unusable.

Always disconnect the power cord by grasping the plug, not the cord.
6.2
Cleaning your E-Panel