Contents 1. Safety information ………………………………………………………………Page 1 2. Chapter 1: Introduction ……………………………………………………………….2 2.1 Overview ……………………………………………………………………………..2 2.2 Features ………………………………………………………………………………. 2.3 Available Options ………………………………………………………..………….. 3. Chapter 2: Setting Up at the Beginning ………………………………………….…. 3.1 Un-Pack your E-Panel ……………………………………………………………….. 3.2 Realizes your E-820 ………………………………………………………………….. 3.3 Connecting Cables ……………………………………………………………………. 4.
6. Chapter 5: Take care of your E-Panel …………………………………………….. 6.1 Basic …………………………………………………………………………………… 6.2 Cleaning your E-Panel …………………………………………………………………. 6.3 Display Screen ………………………………………………………………………… 6.4 Keyboard and Mouse ………………………………………………………………….. 6.5 Moving your E-Panel ………………………………………………………………….. 7. Chapter 6: Removing and replacing Parts ………………………………………… 7.1 Preparing ……………………………………………………………………………….. 7.2 CPU …………………………………………………………………………………….. 7.3 Memory ………………………………………………………………………………… 7.
About this Book This book will help you become familiar with your E-Panel LCD Computer and its features. It provides how to setup, operate, maintain and install options in your computer. In the unlikely event you experience problems. You will find helpful troubleshooting information and instructions for obtaining services in this book. 1. Safety Information Electrical current from power, telephone and communication cables is hazardous.
2. Chapter 1: Information Thank you for purchasing an E-Panel E-820 LCD Computer. Your computer incorporates many of the latest advances in computer technology. This section provides an overview of the computer layout, features and optional parts. 2.1 Overview The E-Panel E-820 Series LCD Computers are using the latest technology which combined a desktop computer components and a LCD monitor together. The size of E820 is same as a 15” LCD monitor.
Three audio jacks for connecting external speakers or headphones, a microphone, and a record/playback device to your computer. Built-In a highly integrated 10/100 Mb/s Ethernet operating. Built-In stereo Speakers. Room for additional functionality with 6 USB, Network, modem serial port, audio ports. Efficient design and an external power supply allow for quiet operation 2.3 Add value options: This section provides the listing of optional parts available to add in E-820.
3. Chapter 2: Setting up at the beginning This chapter provides information from unpack, realizes and connecting cables to your E-820. 3.1 Unpacking your E-820 Please make sure the following items are included with your E-820. If you find that any of these items are missing or appear damaged, please contact your dealer immediately. 3.1.1 E-Panel E-820 LCD Computer * 1 unit 3.1.2 PS/2 Key 107 Key keyboard * 1 unit 3.1.3 PS/2 Optical Mouse * 1 unit 3.1.4 Auto switch AC power adapter and power cord * 1 set 3.
Connect any Universal Serial Bus (USB) devices to USB Connector (ICON). PHOTO If you are one of a client in the network system. Connect a RJ-45 network cable to 10/100M LAN connector (ICON). PHOTO Connect any Serial devices to Serial Port connector (ICON). PHOTO If you have Modem installed in your E-820. Connect a RJ11 telephone line to Phone Jack (ICON). Modem is an optional device in E-820 computer.
use. 4. Chapter 3: Operating This chapter provides information how to operate the E-820 computer at beginning. 4.1 Turning on Power Ensure all cables properly connected and the power cord plugged in the grounded electrical outlet. Then, press and lease the power switch on the computer. You see a diagnostic screen while the computer performs a short self-test.
ICON ICON Main Menu Sub-Menu Auto Adjust ICON ICON Description Adjusts to control the automatically images brightness, contrast, sharpness… Contrast Adjusts the contrast of screen image Brightness Adjusts the screen intensity ICON Gamma Correct Adjusts screen display Colour Colour Temp Adjusts colour temperatures Colour Adjust Adjusts the R, G, B colour Exit Exit Colour Menu Picture H. Position Adjusts the horizontal position of the screen image V.
Adjusts the screen display automatically Auto Adjust Auto Position Auto Phase Function Adjusts the position of screen image automatically Adjusts the noise of screen image automatically Auto Clock Adjusts the width of screen image automatically Auto Colour Adjusts the colour of screen image automatically Exit Exit Function Menu Select the language of OSD Language OSD H. Position OSD Menu OSD V.
4.3 BIOS setting CONFIG 4.4 Display Screen To accommodate local lighting conditions, you can use OSD to adjust the display. Please refer to at page 4. 4.5 CD-ROM, DVD-ROM and Combo Drives The CD-ROM and DVD-ROM drives are read-only devices that let you play most commercially available 8 or 12 centimeter (cm) sound, video or data CDs on the computer. In addition to playing most CDs, the DVD-ROM drive can also play DVDs. CD.
4.8.1 Keyboard You can attach the keyboard we provided or any other PS/2 (Personal System/2) compatible 101 or 102 key keyboard to the E-820’s mini-DIN (Deutsche Industries Norm) connector, as shown at below. PHOTO 4.8.2 Mouse You can attach the mouse we provided or any other PS/2 compatible mouse to E820’s mini DIN mouse connector, as shown at below: PHOTO 4.9 Audio Features You can connect audio devices such as speakers, microphones and record/Playback devices to your E-820.
Before you install the drivers. You need to install Windows XP first. Once finished the OS installation, please prepare the [E-Panel E-820 Series Drivers] CD. Simply insert the driver CD into the CD-ROM and the menu should pop-up automatically. 5.1 Installing general drivers This section provides information to install the drivers for the standard configuration of E-820 computer. Please check carefully or ask your local dealer for more details. 5.1.
5.1.3 Installation completed. 5.2 Installing extra drivers You need to install the extra drivers manually which for the Chipset and Audio. Please note that these two drivers are compatible with all versions of Microsoft Windows. 5.2.1 Chipset Drivers 5.2.1.1 To perform the installation, please click on “Chipset Drivers”.
5.2.1.2 Follow the instructions to continue installation. 5.2.1.
“Finish” to finish the installation. 5.2.1.4 The installation for Chipset Drivers finished. 5.2.2 Audio Drivers 5.2.2.1 To perform the installation, please click on “Audio Driver”.
5.2.2.2 Follow the instruction to complete the installation. Please click on “Continue Anyway” to continue shown as below.
5.2.2.3 Check the box on “Yes, I want to restart my computer now” then chooses “Finish” to complete the installation. 5.2.2.4 The drivers installed completely and your computer will re-boot now. 5.3 Installing optional devices drivers To perform the optional device drivers. Please check the configuration carefully or contact your local dealer for more details. The drivers for optional device are compatible with all versions of Microsoft Windows. 5.3.1 Modem Driver 5.3.1.
5.3.1.2 Follow the instructions to complete the installation. Please click on “Continue Anyway” to continue shown as below.
5.3.1.3 Please click on “Finish” to complete the installation. 5.3.1.4 Installation Completed. 5.3.2 Mini PCI Wireless LAN Driver To perform the Mini PCI Wireless LAN Driver. Please click on “Mini PCI Wireless LAN” then the installation will install the driver automatically.
5.3.3 Mini PCI TV Tuner Driver 5.3.3.1 To perform the Mini PCI TV Tuner Driver. Please click on “Mini PCI TV Tuner Driver” then the installation will install the driver automatically.
5.3.3.2 Once you finished the TV Tuner driver installation. You must install the TV Tuner Player to active and play TV in your E-820. Please refer to the next step (5.3.4) to complete the TV Tuner Player’s installation. 5.3.4 Mini PCI TV Turner Player 5.3.4.1 To perform the Mini PCI TV Tuner Player. Please click on “Mini PCI TV Tuner Player”.
5.3.4.2 The program will guide you to complete the installation. 5.3.4.3 Follow the instruction to continue install until finish.
5.3.5 TouchScreen Driver 5.3.5.1 To perform the Touch Screen Driver. Please click on “TouchScreen Drivers”. Then a new setup screen come up. Choose the correct version of Windows you installed. For this example, we click on “Install WinXP”.
5.3.5.2 Follow the instructions to continue the installation.
5.3.5.3 Choose the “Continue Anyway” when a pop-up window come up (shown as below). 5.3.5.4 The installation completed. Don’t forget to calibrate the Touch Screen as next step.
5.3.5.5 After the installation completed. You need to calibrate the Touch Screen before you use. Please double click “Main Console” icon on the desktop to setup. Click on “Create” in “MainConsole” Menu.
5.3.5.6 Wait for a few seconds, the Main Console will show you the ID of Touch Screen Controller. Please click on “Yes” to continue.
5.3.5.7 The Touch Screen Controller added to Main Console after click on “Yes”.
5.3.5.8 The installation completed. Now, you can setup the touch screen by choosing the functions in Main Console. 5.3.5.9 The installation completed. 5.4 Chapter 5: Removing and Replacing Parts E-panel E820 LCD Computer is a fully equipped desktop. It integrates the LCD display and all the other computer parts into the LCD case. Besides, most of the interfaces are on the back of the computer base that makes the outline neat and fluid. There are three components can be remove or replace by yourself.
It is a good practice to clean your E-820 periodically to protect the surfaces and ensure trouble-free operation. Be sure to turn off the E-820 before the cleaning. Use only mild cleaning solutions and damp cloth to clean the painted surfaces of the computer, LCD screen and keyboard. 6.3 Moving your E-820 Take the following precautions before moving your computer. 6.3.1 Back up all files and data from the hard disk. Operating systems can vary in the way they perform backup procedures.
On Self Test) tests the memory of the PC and reports the total memory installed. It also checks the processor type and speed, the hard disk type and the CD-ROM type. Normally, POST runs very quickly and do not see the results if no error in the self test. Otherwise, you will see the error message of the device. You can use the troubleshooting table below to find solutions to problems that have definite symptoms.
Display Colour, Brightness or Contrast is incorrect CD-ROM Keyboard and Mouse Press the “Auto Adjust” button at the front panel. You are not trying to run your monitor at a higher refresh rate in Windows. See your operating system documentation for information about monitor refresh rate. Pay attention any error on POST. The indicator not lights on when reading Check with the hardware configuration in your operating system.
USB Do not recognize devices Try to unplug and plug in again or use other USB connectors. Be sure the device driver installed. In additional, Windows 98 use to install drivers for USB Network Do not connect Microphone, Earphone, Internal Speakers and External Speakers Not active The network cable is securely connected to network hub or switch properly. In additional, pay attention on the indicator of hub or switch light on or not. Be sure the LAN driver installed.
Main Board Chipset Chipset Intel 845GL/V System memory Memory (RAM) std/max up to 1GB RAM slots total 1 DIMM Module specifications PC2700 Memory speed 333 / 400 MHz RAM type DDR SDRAM Display Screen type description TFT Simultaneous external display Yes Viewable image size (diagonal) 15 inches Support colors 262,144 colours Maximum Resolution 1024x768 Contrast Ratio 400:1 (Typ.) Typical white Luminance 250 nit Response Time 16ms (Typ.
Interface type Standard 3.5 inch Ultra-ATA 100/133 Storage support up to 250GB Graphics Description Intel Extreme Graphics 2 Video RAM type DVMT 2.
Description AC-97 Audio Output Internal: 2 x Internal 2W speaker External: 5.1 speakers Standard features Keyboard E-Panel PS/2 107-key Keyboard Mouse E-Panel PS/2 Optical Wheel Mouse Weight & dimensions Weight 5.35kg Height 379.
Port connectors 6 x USB 2.0 ports 1 x RJ-11 Phone Connector 1 x RJ-45 Network Connector 1 x RS-232 serial port 2 x PS/2 Ports (Keyboard and Mouse) 1 x Mic In 1 x Earphone 1 x External Speakers 1 x TV antenna (Optional) Power Adapter Power Consumption 150W plus with ENERGY STAR the energy economizes the standard A/C Input Auto-switch 100-240V DC Output 19VDC 7.
