HSL 10 Handset Lifter Instruction Manual Bedienungsanleitung Notice d’emploi Istruzioni per l’uso Instrucciones de uso Gebruiksaanwijzing Betjeningsvejledning Handhavande Manual
English ................................................... Deutsch ................................................. Français ................................................. Italiano .................................................. Español .................................................. Nederlands ............................................ Dansk .................................................... Svenska .................................................
HSL 10 handset lifter instruction manual Safety information....................................... 4 Related documents......................................... 4 Service description ....................................... 5 Delivery includes .......................................... 5 Operating elements ..................................... 6 Setting up the handset lifter ...................... 6 Attaching the microphone ......................... 6 Connecting the handset lifter to the base station.........
Safety information Disclaimer • Never disassemble or modify the HSL 10. If the housing is opened by customers in breach of this instruction, the warranty becomes null and void. • Never move the lifting pad by hand. During use • Use the HSL 10 in dry places only and keep liquids and small electrically conductive parts away from the HSL 10 and its connecting sockets. • Make sure that only the handset and no other objects are placed on the lifting pad. Otherwise, the lifting pad cannot lift up the handset.
Service description 4 The HSL 10 handset lifter completes wireless systems like BW 900 and DW 800 from Sennheiser. HSL 10 automatically picks up the handset of your office phone, thus allowing you to operate your telephone even from the distance, i.e. when you are not sitting at your desk. Thanks to its unique ring tone detection via a high quality microphone the HSL 10 reliably recognizes the office phone ringing and forwards the call to your headset.
Operating elements 1 P2 button P1 button LED Modular socket Microphone socket Lifting pad Adhesive mounting tape Microphone fastening position Microphone Hole of the Microphone Setting up the handset lifter Prior to connecting the HSL 10 handset lifter to your telephone, first install and set up your wireless system BW 900 or DW 800. Attaching the microphone The procedure for attaching the microphone depends on where the ringing loudspeaker of your telephone is located.
2c 3 Always make sure not to cover the hole of the microphone with the double-sided adhesive tape. Connect the jack plug of the microphone to the microphone socket . Connecting the handset lifter to the base station 1 Connect the ACCESSORIES socket on the base station with the handset lifter’s modular socket using the cable provided. The LED lights up green five times, if the base station is connected to power. Test the HSL 10 by pressing the hook button on the base station. The lever should move.
Adjusting the lifting height Press and hold down for two seconds both the “P2” button and the “P1” button . The LED alternately flashes red and green. Release the buttons. The lifting pad raises to the currently adjusted height. Increase or decrease the lifting height by pressing the “P2” (increase) or “P1” (decrease) button until you can hear the dial tone. Save the settings by pressing and holding down for two seconds both the “P2” button and the “P1” button .
6 Teaching ring tone 2: Record ring tone 2 in the same way as described for ring 1, but press the “P2” button until the LED flashes red. The LED flashes green twice, if the recording was succesful. In your headset you will hear a ring tone when the HSL 10 recognizes ring tone 1 or 2. Replacing the lateral extension of the lifting pad If the lateral extension is not long enough to lift up the handset or if the handset tends to slip off the extension, you can install a longer one instead.
If problems occur… Problem Possible reason When pressing the hook The lifting height is not button on the mobile sufficient. device or base station, you do not hear a dial tone in your headset. Remedial measures Adjust the lifting height (see page 8). Although your phone is ringing, you cannot hear the ring tone in your headset. The HSL 10 microphone hole Re-position the HSL 10 so that the microphone hole faces the phone loudspeaker. does not face the phone loudspeaker.
Further information In case of further questions, please contact your vendor or, alternatively, your local Sennheiser representative. For more information e.g. regarding problem solutions, warranty conditions, etc. please also see our website www.sennheisercommunications.com under “FAQ” (frequently asked questions) or “Products”, “Wireless solutions“ and “HSL 10”. Accessories Accessory Attachment parts Extension Cable with two modular plugs (RJ 11, 6/6), length: 30 cm Microphone cable Part No.
Specifications Overall unit: Dimensions Weight Temperature range Power source Max. lifting height Max.