Specifications

http://www.GuitarAmplifierPCBs.com
“Baby Will” Valve Junior Conversion Version 4
Build Manual 22 September 2009
17 of 36
7.1.2 PCB Standoffs
Install the one (1) PCB standoff on the back
side of the board in the location shown.
7.1.3 The Power Grid
Install the four (4) rectifier diodes.
Orient the diodes as indicated on the
circuit board. Bend the leads over,
insert them into the board, and bend
them to the side as shown. Solder
them to the board.