User guide

Networking
86
Lecture Recorder x2 User Guide
3. The EpiphanTouch will discover all Epiphan devices. The IP addresses of all
devices will be displayed. Record the IP address corresponding to the
Lecture Recorder x2 you want to configure. If there is more than one
Epiphan device on the network, you can identify your Lecture Recorder x2
by the serial number displayed.
4. To use EpiphanTouch’s remote control feature, select the desired Lecture
Recorder x2 and log into the device as the administrator user. See section
The Administrator User for more details about logging into the Lecture
Recorder x2.
Figure 55 Log into the Lecture Recorder x2 as the Administrator
5. Start or stop video capturing and recording.
11.3 Setting IP Address
Changing the network configuration involves setting how the Lecture Recorder x2
receives an IP address. IP Addresses can be assigned statically or dynamically with
the use of a DHCP server. For network configuration changes to take effect, the