User guide

Networking
84
Lecture Recorder x2 User Guide
to configure the Lecture Recorder x2.
7. Restore the previously save network configurations on the workstation.
11.2 Network Discovery of the Lecture Recorder x2
Instead of connecting directly as described in the previous section, to the Lecture
Recorder x2, the Lecture Recorder x2 can be discovered on the network and its IP
address can be obtained.
You can easily access the Lecture Recorder x2 in the network using service discovery
tools. Please refer to Access through Service Discovery section.
When the Lecture Recorder x2 device is configured for DHCP and has been plugged
into a network with a DHCP server, the DHCP server automatically assigns an IP
address to the Lecture Recorder x2 relevant to the network. Determining the IP
address assigned to the Lecture Recorder x2 is required to access the Lecture
Recorder x2 to allow for further configuring of the device.
There are tools that will return the Lecture Recorder x2’s IP address. Epiphan
provides two such tools and they are described in the following section.
Alternatively, contact the relevant network administrator to retrieve the Lecture
Recorder x2’s IP address.
Regardless of the method used to obtain the Lecture Recorder x2’s IP address, its
assigned IP address is required to allow for any further configuring.
11.2.1 Epiphan’s Network Discovery Utility
Epiphan’s Network Discovery Utility runs on a Windows based PC. It finds the
Lecture Recorder x2 device on the network and displays its assigned IP address. The
Network Discovery Utility can also be used to connect to the Lecture Recorder x2
Web admin interface tool.
11.2.1.1 To install Epiphan’s Network Discovery Utility Tool
1. Find the latest Network Discovery Utility on the website’s download page
(http://www.epiphan.com/downloads/).
2. Select Download Network Discovery Utility. Ensure to note the download
destination folder.