User guide

Recording

Lecture Recorder x2 User Guide

Figure 47 Insert a USB Flash Disk

The Lecture Recorder x2 copies to the inserted USB flash drive, only files recorded

before inserting the flash drive, starting from the oldest record to the newest. The

flash drive’s LED (if any) will be blinking indicating data transfer. The Lecture

Recorder x2 can copy maximum 100 recorded files to the flash drive. If you are

making new recordings during copying data to the flash drive, these new recordings

will not be copied.

Due to speed limitations flash drives are not capable of recording data on the fly.

This means that while the previously recorded data captured by the Lecture

Recorder x2 on its internal solid state memory will be copied to the flash drive, the

currently opened recording file cannot be copied until the file is closed. Once

closed, it is then available for copying.

Once the data has been copied, safely remove the flash drive. To check its free

storage, files that have been copies and their size, insert the drive into a computer

and see its properties.