User guide

Streaming

Lecture Recorder x2 User Guide

used to view video from both DVI and S-Video inputs. The Live View button (see the

section Using the Web Admin Interface’s Live View Feature) performs the same

action.

URLs for the broadcast coming from the DVI port are named as shown below:

http:// (or rtsp://)***.***.***.***:***/stream.***

URLs for the broadcast coming from the S-Video port are named as shown below:

http:// (or rtsp://)***.***.***.***:***/stream_video.***

URL for the broadcast coming from the DVI port (in case you accessed the device

through serial discovery as explained in Access through Service Discovery):

http:// (or rtsp://)<s/n>.local:***/stream_video.*** where s/n is the serial number

of the device

URL for the broadcast coming from the S-Video port (in case you accessed the

device through serial discovery as explained in Access through Service Discovery):

http:// (or rtsp://)<s/n>.local:***/stream.*** where s/n is the serial number of the

device

If you selected the Motion JPEG codec (see the Select Video Codec section), the

following information is displayed:

Snapshot http://***:*/image.jpg

The incoming analog signal’s type, S-Video or composite, is determined

automatically and displayed. This URL is displayed only if the Independent streams

mode is enabled.

See an example below.